If you prefer wood to plastic, permanence to decay, oil paint to latex and well managed forest plantations to oil wells, then EnduraPlus Trim was made for you.

If you prefer wood to plastic, permanence to decay, oil paint to latex and well managed forest plantations to oil wells, then EnduraPlus Trim was made for you.

What is EnduraPlus Wood Trim?

EnduraPlus™ products are a fully treated, primed fingerjointed Pine product that is strong, versatile, easy to use. Made from a renewable resource, these products withstand a wide range of climates and come with a 30 year warranty. The LOSP treatment process makes EnduraPlus safer to use and handle than other treated products. EnduraPlus carries a variety of Green building certifications. EnduraPlus products are paint ready with two factory applied coatings, durable, safe for interior and exterior use, termite resistant and defect free. All siding profiles are CAL FIRE rated. Specially formulated End Sealer, available in paint or spray, protects wood where cuts and notches are made. Finish with acrylic paint.

EnduraPlus™ sidings are available in a variety of popular profiles and sizes. Installation procedures are similar to other siding products except for cut end sealing procedures described later in this manual. EnduraPlus Trim boards are S3S (surfaced three sides) and E2E (eased two edges) for a superb look. Trim boards are available 1x, 5/4x and 2x sizes. Use for general trim, Fascia, and most above ground – non structural applications.

What is EnduraPlus Wood Trim?

EnduraPlus™ products are a fully treated, primed fingerjointed Pine product that is strong, versatile, easy to use. Made from a renewable resource, these products withstand a wide range of climates and come with a 30 year warranty. The LOSP treatment process makes EnduraPlus safer to use and handle than other treated products. EnduraPlus carries a variety of Green building certifications. EnduraPlus products are paint ready with two factory applied coatings, durable, safe for interior and exterior use, termite resistant and defect free. All siding profiles are CAL FIRE rated. Specially formulated End Sealer, available in paint or spray, protects wood where cuts and notches are made. Finish with acrylic paint.

EnduraPlus™ sidings are available in a variety of popular profiles and sizes. Installation procedures are similar to other siding products except for cut end sealing procedures described later in this manual. EnduraPlus Trim boards are S3S (surfaced three sides) and E2E (eased two edges) for a superb look. Trim boards are available 1x, 5/4x and 2x sizes. Use for general trim, Fascia, and most above ground – non structural applications.

EnduraPlus Features & Benefits

PRESSURE TREATED PRESERVATIVE

Pressure treated with EPA approved chemicals to prevent rot, decay and termite infestation.

SMOOTH STABLE SUBSTRATE

Kiln Dried lumber with knots and imperfections removed then finger-jointed for a smooth stable substrate.

PROTECTED
30 YEARS

30 year limited warranty against rot and termite infestation is fully transferrable to new owners.

DOUBLE COAT

2 coats of factory applied primer for a smooth paint ready surface. Apply 2 coats of acrylic latex for final appearance and protection.

RATING

UC3A – Treatment process is tested by third party industry experts for above ground exterior use.

RENEWABLE RESOURCES

All lumber used in EnduraPlus is from sustainable plantation forests.

EPA APPROVED

Chemicals used to treat EnduraPlus are EPA approved. Safe to use both indoors or out.

NON-CORROSIVE

Chemicals used to treat EnduraPlus are noncorrosive to nails and other type of fasteners.

CAL FIRE RATED

All sidings have been WUI (Wildlife Urban Interface) fire rated to California State Fire Marshall standards when installed horizontally

CAL FIRE SEAL

Look for products with this logo for California Fire Certification.

EnduraPlus Features & Benefits

PRESSURE TREATED PRESERVATIVE

Pressure treated with EPA approved chemicals to prevent rot, decay and termite infestation.

SMOOTH STABLE SUBSTRATE

Kiln Dried lumber with knots and imperfections removed then finger-jointed for a smooth stable substrate.

PROTECTED
30 YEARS

30 year limited warranty against rot and termite infestation is fully transferrable to new owners.

DOUBLE COAT

2 coats of factory applied primer for a smooth paint ready surface. Apply 2 coats of acrylic latex for final appearance and protection.

RATING

UC3A – Treatment process is tested by third party industry experts for above ground exterior use.

RENEWABLE RESOURCES

All lumber used in EnduraPlus is from sustainable plantation forests.

EPA APPROVED

Chemicals used to treat EnduraPlus are EPA approved. Safe to use both indoors or out.

NON-CORROSIVE

Chemicals used to treat EnduraPlus are noncorrosive to nails and other type of fasteners.

CAL FIRE RATED

All sidings have been WUI (Wildlife Urban Interface) fire rated to California State Fire Marshall standards when installed horizontally

CAL FIRE SEAL

Look for products with this logo for California Fire Certification.

THE LOSP TREATMENT PROCESS

The natural wood substrate is 100% Radiata Pine sourced from sustainable plantation forests. The wood is kiln dried and then has all knots, pitch pockets and other defects removed. The defect free lumber is then fingerjointed and edge glued with high quality exterior grade adhesives.

The raw wood is then treated using an LOSP treatment process. Unlike some treatment processes, this system does not puncture the wood and leave unsightly incisor marks. LOSP stands for Light Organic Solvent Preservative. The process involves three preservatives that are carried into the wood using an organic solvent and vacuum pressure treating system. The preservatives are not soluble in water so they will not leech out of the wood due to moisture. The three preservatives are divided into two functions:

Permethrin is the component that prevents termite infestation. It is EPA approved and is a component of most household termite sprays. Propiconazole and Tebuconazole are the components that prevent fungal growth (AKA dry rot). These chemicals are EPA approved and are commonly used in agriculture to prevent fungal growth on food crops. The treatment process also carries paraffin wax and hydrocarbon resin into the wood to enhance water repellent characteristics.

EnduraPlus meets requirements for H-3 (Chile and New Zealand) and UC-3A and UC-3B (USA) third party rating systems. The “H” refers to Hazard Level, and the UC refers to Use Category. The UC3-B rating is the AWPA (American Wood Preserving Association) category for above ground, exterior use. H-3 is an identical rating. The associations involved are considered the experts in the field of treated lumber. Their techniques offer the most reliable service and performance.

FACTORY APPLIED PRIMER

EnduraPlus™ has two coats of factory applied primer. The primer is an alkyd based product specially developed for use with LOSP treated wood. The primer has a high resistance to cracking, flaking and chipping, and provides a strong base for final coat adhesion.

The primer is not a sealer and will allow some water absorption. For best results apply a topcoat before primed wood gets heavy rain. While the preservatives will not leech out from rain contact, the wood can swell from water absorption. Once the rain stops the water will evaporate from the wood and it will shrink back to original size. This will not affect overall performance but can cause some cosmetic issues.

THE LOSP TREATMENT PROCESS

The natural wood substrate is 100% Radiata Pine sourced from sustainable plantation forests. The wood is kiln dried and then has all knots, pitch pockets and other defects removed. The defect free lumber is then fingerjointed and edge glued with high quality exterior grade adhesives.

The raw wood is then treated using an LOSP treatment process. Unlike some treatment processes, this system does not puncture the wood and leave unsightly incisor marks. LOSP stands for Light Organic Solvent Preservative. The process involves three preservatives that are carried into the wood using an organic solvent and vacuum pressure treating system. The preservatives are not soluble in water so they will not leech out of the wood due to moisture. The three preservatives are divided into two functions:

Permethrin is the component that prevents termite infestation. It is EPA approved and is a component of most household termite sprays. Propiconazole and Tebuconazole are the components that prevent fungal growth (AKA dry rot). These chemicals are EPA approved and are commonly used in agriculture to prevent fungal growth on food crops. The treatment process also carries paraffin wax and hydrocarbon resin into the wood to enhance water repellent characteristics.

EnduraPlus meets requirements for H-3 (Chile and New Zealand) and UC-3A and UC-3B (USA) third party rating systems. The “H” refers to Hazard Level, and the UC refers to Use Category. The UC3-B rating is the AWPA (American Wood Preserving Association) category for above ground, exterior use. H-3 is an identical rating. The associations involved are considered the experts in the field of treated lumber. Their techniques offer the most reliable service and performance.

FACTORY APPLIED PRIMER

EnduraPlus™ has two coats of factory applied primer. The primer is an alkyd based product specially developed for use with LOSP treated wood. The primer has a high resistance to cracking, flaking and chipping, and provides a strong base for final coat adhesion.

The primer is not a sealer and will allow some water absorption. For best results apply a topcoat before primed wood gets heavy rain. While the preservatives will not leech out from rain contact, the wood can swell from water absorption. Once the rain stops the water will evaporate from the wood and it will shrink back to original size. This will not affect overall performance but can cause some cosmetic issues.

ENDURAPLUS TRIM AVAILABLE SIZES

Resawn Trim and Fascia (S1S2E)
1”
Size: 1″x2″, 1″x3″,  1″x10″
Length: 20′
Size: 1″x4″, 1″x6″, 1″x8″, 1″x12″
Length: 16′, 20″

Resawn Trim and Fascia (S1S2E)
2”
Size: 2″x2″
Length: 20′
Size: 2″x4″, 2″x6″, 2″x8″, 2″x10″, 2″x12″
Length: 16’, 20′

Resawn Trim and Fascia (S1S2E)
5/4”
Size: 5/4″x4″, 5/4″x6″
Length: 20′

ENDURAPLUS TRIM AVAILABLE SIZES

Resawn Trim and Fascia (S1S2E)
1”
Size: 1″x2″, 1″x3″,  1″x10″
Length: 20′
Size: 1″x4″, 1″x6″, 1″x8″, 1″x12″
Length: 16′, 20″

Resawn Trim and Fascia (S1S2E)
2”
Size: 2″x2″
Length: 20′
Size: 2″x4″, 2″x6″, 2″x8″, 2″x10″, 2″x12″
Length: 16’, 20′

Resawn Trim and Fascia (S1S2E)
5/4”
Size: 5/4″x4″, 5/4″x6″
Length: 20′

EnduraPlus SIDING PROFILES

Cove Siding
#772
Size: 1″x10″
Length: 20′

Bevel Channel Siding
#773
Size: 1″x10″
Length:  20′

V-Rustic Siding
#793
Size: 1″x6″
Length: 16’, 20′

V-Rustic Siding
#794
Size: 1″x8″
Length: 16’, 20′

V-Rustic Siding
#795
Size: 1″x10″
Length: 16’, 20′

EnduraPlus SIDING PROFILES

Cove Siding
#772
Size: 1″x10″
Length: 20′

Bevel Channel Siding
#773
Size: 1″x10″
Length:  20′

V-Rustic Siding
#793
Size: 1″x6″
Length: 16’, 20′

V-Rustic Siding
#794
Size: 1″x8″
Length: 16’, 20′

V-Rustic Siding
#795
Size: 1″x10″
Length: 16’, 20′

30-YEAR TRANSFERABLE WARRANTY

EnduraPlus™ is covered by a 30 year limited warranty against termites and fungal decay. This warranty guarantees replacement product will be provided if the original product becomes unserviceable due to fungal or termite attack during the warranty period. Replacement product will be supplied at the original store where purchased or the closest alternative if the original location is not available. This warranty is transferable to future owners. Keep copies of original invoices or receipts and some end tags from the lumber for confirmation against this warranty.

30-YEAR TRANSFERABLE WARRANTY

EnduraPlus™ is covered by a 30 year limited warranty against termites and fungal decay. This warranty guarantees replacement product will be provided if the original product becomes unserviceable due to fungal or termite attack during the warranty period. Replacement product will be supplied at the original store where purchased or the closest alternative if the original location is not available. This warranty is transferable to future owners. Keep copies of original invoices or receipts and some end tags from the lumber for confirmation against this warranty.

MORE INFORMATION

For more information on EnduraPlus™ fingerjointed wood trim boards and moulding products, call us toll free at 888-742-6763, or email using the form below and we will get back to you with a response as soon as possible. Thank you!

For security verification, please enter any random two digit number. For example: 63

MORE INFORMATION

For more information on EnduraPlus™ fingerjointed wood trim boards and moulding products, call us toll free at 888-742-6763, or email using the form below and we will get back to you with a response as soon as possible. Thank you!

For security verification, please enter any random two digit number. For example: 84

Capital Lumber Locations

Capital Lumber Locations